OFM Technical Rope Rescue Practice Exam

These questions are part of the practice quiz. Start practicing

• What is the function of edge protection gear in rope rescue?
• What is a clove hitch primarily used for in rope rescue, and what is a major caveat?
• How should rope be managed to prevent entanglement during multi-person operations?
• When rehab is required for responders, which of the following is recommended?
• What is the benefit of lowering a rescuer in a high angle rescue situation?
• What should be done with rescue equipment that has been contaminated with hazardous materials?
• In a two-person load using a figure 8 descender, how many wraps are recommended around the device?
• What is progress capture in a hauling system?
• Which document should be consulted to understand hazards and required rescue capabilities prior to operations?
• Which items are primary components of a rescue anchor system?
• Using a simple 3:1 mechanical advantage system, how many feet of rope are pulled through the system to raise a person 50 feet?
• Which of the following items constitute minimum PPE for a rescuer?
• What is the primary danger of using damaged rope in rescue operations?
• A G-rated rope's minimum breaking strength is 40 kN. Which of the following is a correct equivalent in pounds-force?
• What primary benefit do edge protection devices provide?
• In a low-angle rescue environment, which litter is identified as the most suitable option?
• Which standard specifies the minimum job performance requirements for technical rescue personnel?
• What is the primary purpose of a rescue briefing before operations begin?
• Which practice helps ensure direction control when traversing uneven terrain with a haul line?
• Using the OATH method of communication, how many rope tugs would indicate the need to eliminate slack in the rope?
• Which type of belay system has a separate anchor, rope, and person to manage it?
• Which knot is most commonly used to tie the rope to a climber’s harness for a secure connection?
• Which equipment type is commonly used to shield rope from sharp edges?
• What is the role of a safety backup line in rope work?
• Who needs to understand the accountability system at an incident?
• Which method is used to inspect rope?
• What is the purpose of a backup belay line in some systems?
• How should you approach patient packaging on a rope-rescue if spinal injury is suspected?
• What is the name for the written document that identifies hazards within the local jurisdiction, the need for specific types of rescue capabilities, and standard operating procedures used to conduct rescue operations?
• Which description best captures a common problem caused by edge contact on rope?
• When rigging above an edge, what is a key precaution?
• What is the primary outcome of applying proper edge protection during a rope rescue?
• For a 4:1 mechanical advantage system loaded with 200 pounds, what is the load on the rope?
• What is the primary purpose of a scene size-up in a technical rope rescue?
• Edge management contributes to safety by which of the following?
• Critical Incident Stress Debriefings have which characteristic?
• If an ascender is used in a hauling system, which way should the arrow point towards?
• What steps ensure patient stabilization when rigging a litter for lowering?
• Which type of litter is best suited for the low angle environment?
• Which type of belay system activates without any reaction from the belayer?
• How is a system safety check done?
• Which practice helps prevent rope damage when working near edges?
• How is a rope inspected?
• In an anchor system, what is the benefit of using multiple low-stretch points rather than a single high-load point?
• What is edge protection with respect to rope movement over a lip or corner?
• What is a key sign to check in a rope's condition that would indicate retirement from service?
• Which arrangement provides the most reliable orientation control for a haul line on uneven terrain?
• What is the function of a Prusik in rope rescue systems?
• Why is a redundant anchor system important in rope rescue?
• What is the minimum breaking strength of a G-rated life safety rope?
• In what situation is a safety backup line particularly important?
• What is the function of a progress capture device in a hauling system?
• What is the primary purpose of edge protection in rigging above a hazardous edge?
• What is a common failure mode in anchor systems that must be guarded against?
• When operating near an edge, which action is prudent?
• How does proper edge management influence system integrity?
• Which item is NOT typically considered essential PPE for rope rescue operations?
• How should you manage rope to prevent tangling when multiple rescuers are operating?
• In a hauling system with an ascender, the arrow on the device should point toward the direction of the load. Which option represents that direction?
• Which device is commonly used to create a 3:1 or 5:1 hauling system in rescue operations?
• In a rescue belay arrangement, which setup is operated by a person stationed below the rappeller?
• What is an advantage of the tensionless hitch anchor?
• How can rescuers prevent disease transmission?
• What factor should be prioritized when selecting a pulley to minimize wear on rope?
• What is the difference between a fixed pulley and a moving pulley in a rescue system?
• Which statement correctly identifies the two main components of kernmantle rope?
• What are the primary components of an anchor system used for rescue?
• Which statement is true about dynamic kernmantle rope?
• Which equipment is essential to inspect regularly for rope rescue?
• The descent control device primarily relies on which physical phenomenon to slow descent?
• What is a primary technique to minimize rope damage when negotiating edges during a lowering operation?
• What can happen if rope rubs on an edge without protection?
• A black triage tag attached to a victim indicates which priority level?
• What is a critical factor when selecting a pulley size for a rescue system?
• Which of the following is included in a system safety check for rescue equipment?
• Which statement is true about a progress capture device (PCD)?
• What is the belayer's response to the call of 'on rope'?
• Which device is used for lowering a load that may change during operations?
• How do you verify a rope’s condition before use?
• In rope rescue, what is the function of a munter hitch?
• Which factor describes the purpose of using a broad, redundant anchor on irregular surfaces?
• Which term describes having multiple independent load paths beyond a single point of failure?
• What does MBS stand for in rope hardware specifications?
• In an incident management system, which position is primarily responsible for coordinating information flow and incident action planning?
• If there are two feet of a lever on one side of the fulcrum and ten feet of lever on the other side, what is the mechanical advantage?
• How much strength is lost when a nylon rope is wet?
• What is the recommended practice for communicating with the crew during rope rescue?
• Name two common hauling/rigging configurations used to move a patient laterally or vertically.
• Which practice helps minimize rope friction at anchors or pulleys?
• What is the main concept of descent control devices?
• How many points of attachment are used to attach the litter bridle to the litter?
• Which element is essential when tying a figure-eight knot for harness attachment?
• What is the role of load-distributing hardware in an anchor system?
• What is true about life safety rope?
• Which statement best describes a risk-benefit assessment in rope rescue operations?
• In a 3:1 system, if the load moves 50 feet upward, how many feet of rope must be pulled through?
• What harness-to-rope connection risk you must mitigate?
• Which of the following is a typical component evaluated during regular rope rescue equipment inspection?
• Before loading an anchor in the field, which check is recommended?
• How do you determine load distribution when rigging multiple anchors?
• During a rescue briefing, which element contributes to crew understanding?
• Who is responsible for developing the Incident Action Plan?
• Which standard addresses the inspection and maintenance of rescue equipment?
• If dynamic rope is used in a rescue and its elongation is unpredictable, what is the recommended approach?
• Which belay system is one of the most popular belay systems used in the fire service?
• What is the purpose of edge protection devices on an acute ascent or descent?
• When should a Personnel Accountability Report be conducted?
• Which of the following is used to secure a litter tender's tie-in to the litter?
• What percentage range describes the stretch of a general-use life safety rope under load (1-10%)?
• What is the best practice for rope handling during patient lowering?
• What is edge protection and why is it critical in rope systems?
• What can be said about Critical Incident Stress Debriefings?
• Which type of belay system is managed by a separate person below the rappeller?
• What is the primary purpose of establishing incident command and a safety plan during the scene size-up?
• What is the standard number for the NFPA Standard on Life Safety Rope and Equipment for Emergency Services?
• Which statement correctly describes the purpose of a rescue equipment log?
• What is the advantage of a lowering system?
• How do you determine the appropriate load rating of rigging hardware?
• What is the correct pounds-force equivalent of 40 kN for the G-rated rope?
• What is the purpose of a rescue equipment log?
• In a hauling system, what is the role of a progress-capture device?
• Which term describes distributing load among anchors to minimize single-point failure?
• ULC-S555-01 is a standard for which topic?
• Who may conduct a system safety check?
• Why is edge management critical during rope operations near edges?
• What is meant by a “load path” in rigging?
• Why is communications discipline critical in a rope rescue operation?
• Which technique describes safe patient lifting in rope rescue?
• When would you intentionally use a dynamic rope in a rope-rescue scenario?
• Which factor is essential to evaluate about anchor points on uneven terrain before a lowering operation?
• Which statement describes static rope's suitability for most rescue rigging?
• Which statement is NOT a risk of failing to manage rope near edges?
• What is indicated by a black triage tag attached to a victim?
• Which factor should be considered when evaluating anchor load paths during a multi-anchor rig?
• What logic underpins the use of multiple independent anchors rather than a single strong anchor?
• Which type of belay system protects a rescuer on rappel but does not have a separate person to manage it?
• When tying a figure-eight knot for harness attachment, what is essential to ensure?
• Which NFPA standard number corresponds to the standard on Life Safety Rope and Equipment for Emergency Services?
• In what situation would you use a rescue knot such as the alpine butterfly?
• What is the primary consideration when choosing anchor points on varied terrain?
• Which statement about edge deflection devices is true?
• Who must give permission before you approach a helicopter?
• When packaging a patient in a low-angle environment, which factor should be prioritized?
• When is it appropriate to use a high-hands-on belay technique?
• When should a Critical Incident Stress Debriefing begin?
• What is the role of a safety officer in a rope rescue incident?
• Nylon roping exposed to moisture loses roughly what percentage of its strength?
• In a hauling system, which term is typically announced when the progress capture device engages?
• Which statement best describes edge transition in rigging?
• Which IMS section is responsible for collecting, collating, and disseminating information?
• What type of rescue rope is described as having minimal stretch under load and is typically used as an anchor or hauling rope?
• Where is the continuous label located on life safety rope?
• How should ropes be stored when not in use to prevent degradation?
• Which hitch is used to secure a litter's tie-in during rescue operations?
• What inspection step should be performed before reusing rope?
• Which of the following is recommended when rehab is required?
• Which combination of PPE is essential specifically for rope rescue operations?
• Which statement about life safety rope is correct?
• Which fastening method would you use to create a temporary anchor on a tree or irregular surface?
• Which anchor method helps distribute load and provide redundancy on irregular surfaces?
• What is the difference between anchor equalization and anchor redundancy?
• What is the relationship of input and output forces in a mechanical advantage system?
• Which is a clear sign that edge management is inadequate during a setup?
• What can be used as edge protection in rope rescue setups?
• Where will you find a continuous tape/label that identifies the date of manufacture, the lot number, and NFPA compliance?
• Ropes used for low-angle rescue operations should meet which standard?
• The minimum breaking strength of a G-rated life safety rope is 40 kN. Which of the following is the equivalent in pounds-force?
• Which standard specifies the minimum job performance requirements for technical rescue personnel?
• Which type of general use life safety rope stretches 1-10% at 10% of its minimum breaking strength?
• Who is responsible for establishing documentation methods, such as incident reports, inspection reports, and injury reports?
• Which practice best describes redundancy in anchor selection?
• In rope rescue planning, why is anchor point redundancy important?
• What is a common method to protect a rope when passing over a ledge or edge?
• Which device is best for lowering a load that may change during the operation?
• The litter bridle attaches to the litter at how many points?
• Which NFPA standard number pertains to Life Safety Rope and Equipment for Emergency Services?
• Which document is prepared to identify hazards within the local jurisdiction and the rescue capabilities needed before an incident?
• What risk is associated with dynamic (high-stretch) rope in most rope rescue applications?
• What are the two main components of kernmantle rope?
• In incident management, the emergency phase ends when which condition is met?
• If the haul team exerts a force of 200 pounds onto a 4:1 mechanical advantage system, what is the resulting force?
• What is the typical role of a belay device in rope rescue?
• What does a Z-drag system accomplish in rope rescue?
• What is the primary responsibility of the safety officer at a rope rescue incident?
• Which knot is used for webbing?
• During packaging operations, which consideration indicates all factors are being addressed?
• Why is a backup knot or backup line used when rappelling or ascending?
• Which statement accurately reflects edge management in rope operations?
• When is the emergency phase of an incident over for the firefighter?
• How should you handle heat buildup during extended rope-haul operations?
• What is required to be provided when the SOP specifies active cooling is to be implemented?
• What information should you provide to paramedics?
• When evaluating a near-edge rope path, what should be verified?
• What is the purpose of using a knot or hitch to secure the rope to a carabiner?
• How many times would you wrap the rope around a figure 8 descender/rescue 8 for a two-person load?
• Which approach best ensures safe load distribution when rigging multiple anchors?
• What term describes a belay system that uses a separate anchor, rope, and person to manage it?
• In rope rescue, what term is used for the wheel that the rope rides over in a pulley system?
• What is the primary method to ensure all crewmembers understand their responsibilities during rope rescue?
• What property must be considered when using a dynamic rope in rescue scenarios?
• What is the minimum breaking strength (MBS) of a general-use carabiner?
• The standard ULC-S555-01 relates to which area of emergency services?
• The NFPA standard number for Life Safety Rope and Equipment for Emergency Services is what?
• What determines the amount of energy a rope can absorb when arresting a fall?
• How would you describe a proper load-testing procedure for a rescue anchor?
• Which practice helps prevent rope entanglement during multi-person operations?
• What does 'input force' refer to?
• What should be provided when rehab is required?